JVC SP-XSA9 - Manual (Page 21)

17 17 17 17
English
■ ■
Basic operations
The basic operations for this system are as follows.
IMPORTANT
Check that remote control mode selector is set to the appropriate
position:
Set to “AUDIO/TV/VCR” to operate an audio system, TV, or
VCR.
Set to “CATV/DBS” to operate a CATV converter or DBS tuner.
The system will not operate normally while in CATV/DBS mode.
To turn the system power supply
ON and OFF (standby)
From the remote control:
Press AUDIO to turn power on.
The STANDBY lamp goes off, and the current source name
(DVD, AM or FM station frequency, or AUX) appears on the dis-
play window. At this time, the disc cover slides backwards and the
top buttons on the center unit appears.
Press AUDIO again to turn power off (standby).
The STANDBY lamp is lit.
The disc cover slides forward to cover the top buttons on the center
unit and the center unit turns off.
On the center unit:
Press to turn power on.
The STANDBY lamp goes off, and the current source name
(DVD, AM or FM station frequency, or AUX) appears on the dis-
play window. At this time, the disc cover slides backwards and the
top buttons on the center unit appears.
Press again to turn power off (standby).
The STANDBY lamp is lit.
The disc cover slides forward to cover the top buttons on the center
unit and the center unit turns off.
Notes:
• The powered sub-woofer power supply is linked to the
center unit. The green POWER ON lamp on the powered
sub-woofer lights when power is turned on, and goes off
when power is turned off.
• A small amount of power is consumed in the standby
mode (center unit only). Remove AC power cord from the
AC outlet to turn the center unit off completely.
To turn TV power ON and OFF
JVC TVs may be used as is with the remote control. TVs from oth-
er manufacturers require changes to the transmittable signals be-
fore they can be used with the remote control. See page 55 for
details of changing the transmittable signals.
From the remote control:
Press TV/CATV/DBS to turn power on.
Press TV/CATV/DBS again to turn power off.
Adjusting volume [VOLUME]
The volume level can be adjusted within the range of “0” (mini-
mum) to “80” (maximum).
Common:
From the remote control
On the center unit
Press VOLUME + or –.
Press VOLUME + to increase volume.
Press VOLUME – to decrease volume.
CAUTION:
Always set the volume to the minimum before starting
any source.
If the volume is set at its high level, the sudden blast
of sound energy can permanently damage your hear-
ing and/or ruin your speakers.
DVD
AUDIO TV/CATV/DBS
STANDBY/ON
VCR
DECODE TITLE
TIME DIGEST
VCR
TV
CONTROL SUBWOOFER EFFECT
CENTER TEST
DISPLAY
CHOICE ANGLE RETURN SOUND
FM/AM AUX
SUBTITLE
ZOOM
AUDIO
AUDIO
STANDBY lamp
DVD
AUDIO TV/CATV/DBS
STANDBY/ON
VCR
DECODE SUBTITLE TITLE AUDIO
TIME DIGEST ZOOM
VCR
TV
CONTROL SUBWOOFER EFFECT
CENTER TEST
DISPLAY
CHOICE ANGLE RETURN SOUND
FM/AM AUX
TV/CATV/DBS
TUNING UP DOWN
REC
/REW FF/
PAUSE
TV/VIDEO MUTING
F.SEARCH B.SEARCH
PLAY
CHANNEL TV VOL VOLUME
STOP
TV/VCR
CATV/DBS
ENTER
PLAY
MODE
THEATER
POSITION
DSP
MODE
VOLUME + / –
VOLUME + / –
TH-A9(UW).book Page 17 Monday, March 12, 2001 9:17 AM