Lan cable connection, Monitor signal output terminal connection, Connection – JVC VN-V25U User Manual

Page 16: G installation, Alan cable, Connection / installation, When connecting to a hub, When connecting to a computer, Caution, Make use of a straight cable

Connection / Installation

Connect the camera to a hub or computer using
a LAN cable.

Ⅵ When connecting to a hub

Make use of a straight cable.

Ⅵ When connecting to a computer

Make use of a cross cable.

Caution:

● However, cross cables cannot be used with

some computer models. When connecting
VN-V25U directly to a computer, check the
computer’s LAN specifications in advance.

Note:

● Make use of a Category 5 (or higher) cable

when 100BASE-TX is used.

● To distribute images to the network, set the

[MONITOR OUT] switch at the side of this
product to

AOFFB.

This terminal is used for adjusting the camera
angle during installation. Connect it to devices
such as a video monitor using a video cable
(RCA).

Caution:

● A longer cable extension distance causes

signals to be attenuated, image resolution to
deteriorate and noise to increase.

Note:

● Select the signal system for the monitor

output using the [MONITOR OUT] switch at
the side of this product. (

ANTSCB or APALB)

After adjusting the camera angle, set the
switch to

AOFFB. After changing the switch

settings, press the Reset button to reboot the
camera.

LAN Cable Connection

Cable to use

● Shielded cable

● Length of 100 m or shorter

CAUTION

: NEVER USE

PoE

AND

AC 24V

AT THE SAME TIME

DO NOT CONNECT TO THE TELEPHONE NETWORK

SEE INSTRUCTION MANUAL

CLASS

ONL

FOR

USA

ISOLA

TED

WER

ONL

FOR

EUR

OPE

AND

THER

MONITOR

OUT

10BASE-T/
100BASE-TX

PUSH

OUTPUT

INPUT

AC24V

ALARM

STATUS

MONITOR OUT

IRIS

PAL

OFF NTSC

RESET

[MONITOR OUT] Switch

Monitor Signal Output Terminal
Connection