Jensen Phase Linear UV10 - Manual (Page 6)

2
UV10
CONTROLS AND INDICATORS
1. CLOSE/OPEN
Press to activate the automatic mechanical system and move
the TFT monitor into viewing position. Press again to close
the TFT.
2. PIC/BAND
Press to adjust the Brightness and Contrast (see “Image/
Display Settings” on page 5).
With the monitor closed, press BAND to change between
three FM and two AM bands.
3. DISC SLOT
4. WIDE/ |<<
Press to adjust the display aspect of the picture to one of two
settings: Full, Normal or STANDBY.
With the monitor closed, press to seek backward.
When the NAV102 is connected to the UV10, press and hold
to display the navigation user interface. The TFT screen must
be open for this function to operate.
5. TILT / >>|
Press to activate the tilt function. Use the rotary encoder to
make adjustments while the yellow tilt icon is flashing.
With the monitor closed, press to seek forward.
6. EJECT
Press to eject a disc.
Press and hold to reset core mechanism position.
7. LCD Display
8. DISP
With the monitor closed, press to view alternate LCD display
information.
9. IR Remote Control Receiver
10. SRC
Press to turn unit on. Press and hold to turn the unit off.
When on, press once to select playing mode.
11. Rotary Encoder
Rotate to adjust the volume. Press and release to enter and/
or confirm audio settings.
Press to activate the MUTE function and silence the receiver.
Press again to resume sound.
Press and hold to activate the Local (LOC) setting. Press and
hold again to turn Local reception off.
12. RESET
Press to reset system settings to factory default (except the
password and parental lock setting).
13. A/V Input
Attach a compatible A/V device.
14. USB Interface Connector
Connect a USB device for playback of music/video files.
15. TFT Display
3
8
10
11
9
6
7
15
14 13
12
UV10
A / V
INPUT
OPEN BAND AS/PS DISP
PIC
160
WATTS
SERIES
MULTIMEDIA RECEIVER
1 2 4 5