Uv10 – Jensen Phase Linear UV10 User Manual

Page 27

UV10

Dialed Calls

The Dialed Calls list retrieves the list of dialed numbers from
your phone. The last dialed number is the first number on the
list. Touch the Dialed Calls menu option to view the list. To
make a call from the Dialed Calls list, touch the number and

then touch the

button. The TFT will display “Cannot get

dialed record” when the feature is not available.

Received Calls

Use the Received Calls list to view the last 10 received
numbers stored on your phone. To access the Received list,
touch the Received Calls menu option. The last received
number is the first number on the list. To make a call from the

Received Calls list, touch the number and then touch the

button. The TFT will display “Cannot get received record”
when the feature is not available.

Phone Book
1.

Touch the Phone Book menu option to display the
phone book stored on your mobile phone, if compatible.
The screen will display “Ready...” while the phone book
is downloading.

Once the download is completed, you can use the arrow
buttons and scroll bar on the right side of the window to
navigate the list. Since the unit downloads one page of
entries at a time, there may be a slight delay while the
next page of numbers is downloaded.

Touch to highlight the number you want to dial and then

touch the

button.

NOTE: Some mobile phones do not support Phone Book
upload through Bluetooth. This is a limitation of the
phone, not the UV10.

Bluetooth Setup

Auto Answer

You can choose to have the UV10 automatically answer
incoming calls to your paired Bluetooth phone. To turn “Auto
answer” on:

Touch the

button to view the SETUP menu.

Select the “Bluetooth” sub-menu.

Touch the area to the right of “Auto answer” to select
“Auto”.

Auto Connect

The auto Connect option will allow the UV10 to automatically
connect to your previously paired Bluetooth when it is in
range. When the Connect option is set to “Manual”, you must

press the

button to re-establish a connection with your

phone. To turn auto “Connect” on:

Touch the

button to view the SETUP menu.

Select the “Bluetooth” sub-menu.

Touch the area to the right of “Connect” to select “Auto”.

Advanced Audio Distribution Profile

(A2DP)

The UV10 allows you to play back audio files from your
phone, PDA or personal music player using a Bluetooth
connection.

Before using an audio player, it may be necessary to enter a
PIN code into the unit. Enter the PIN code referring to
“Bluetooth Sub-menu Features” on page 9.

NOTE: Please quit A2DP mode before attempting to
make a phone call, as unexpected results may occur
depending on your mobile phone model.

The UV10 can control a Bluetooth audio player via Advanced
Audio Distribution Profile (A2DP) or Audio/Video Remote
Control Profile (AVRCP). Bluetooth audio players (or
Bluetooth adapters) compatible with these profiles can be
connected to this unit. Functionality varies depending on the
profile used.