JVC TM-1011G - Manual (Page 10)

10
How to Use MAIN MENU
7MAIN MENU Screens
Setting Items MAIN MENU
Move the MENU/
VOLUME control to
/
to adjust an item.
About “ sub menu” and
“reset,”
☞ page 9
Move the MENU/
VOLUME control to
.
☞ page 9
* To go back to the previous menu,
press the MENU/VOLUME control.
NOTE:
• Some items do not appear on the menu depending on the signal currently input or if there is no signal input. Those items are
not available to use.
7Functions and Adjustment Range of Items
☞ see below.
APERTURE CONTROL
Compensates the
frequency characteristics of
the luminance signal of a
video signal.
7 LEVEL
Adjusts the compensation value. The higher the
number is, the larger the compensation value gets.
• 00 O 10
7 CONTROL FREQ.
Selects the frequency to compensate.
HIGH: Compensates the high frequencies.
LOW: Compensates the low frequencies.
OFF: No compensation.
sub menu SELECT
Selects the positions and the contents of the sub-menu
display.
☞ “To change the positions and the contents of the sub-
menu display” on page 9
ASPECT
Selects the aspect ratio.
• 4:3/16:9
En_08-10_TM-1011G.p65 06.2.14, 22:34 10