JVC KD-APD89 User Manual

Page 230

ENGLISH

Symptoms

Remedies/Causes

Bluetooth

• Bluetooth device does not detect the unit.

The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.

• The unit does not detect the Bluetooth

device.

• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device

detects the unit, select “Open...” on the unit to connect
the device. (See page 12.)

• The unit does not make pairing with the

Bluetooth device.

• Enter the same PIN code for both the unit and target

device.

• Select the device name from “Special,” then try to

connect again. (See page 13.)

• Phone sound quality is poor.

• Reduce the distance between the unit and the

Bluetooth cellular phone.

• Move the car to a place where you can get a better

signal reception.

• The sound is interrupted or skipped during

playback of a Bluetooth audio player.

• Reduce the distance between the unit and the

Bluetooth audio player.

• Disconnect the device connected for “BT-PHONE.”
• Turn off, then turn on the unit.
• Connect the player again, when the sound is not yet

restored.

• The connected audio player cannot be

controlled.

Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)

CD changer

• “No Disc” appears on the display.

Insert a disc into the magazine.

• “No Magazine” appears on the display.

Insert the magazine.

• “Reset 08” appears on the display.

Connect this unit and the CD changer correctly and press
the reset button of the CD changer.

• “Reset 01” – “Reset 07” appears on the

display.

Press the reset button of the CD changer.

• The CD changer does not work at all.

Reset the unit (see page 3).

EN32-39_KD-G845_001A_4.indd 36

12/8/07 12:41:10 PM