JVC KD-APD89 User Manual

Page 187

REFERENCE

Symptoms

Remedies/Causes

USB device

• Noise is generated.

• The track played back is not a playable file format

(MP3/WMA/WAV). Skip to another file.

• Do not add the extension code <.mp3>, <.wma>, or

<.wav> to non-MP3/WMA/WAV tracks.

• Tracks cannot play back as you have

intended them to play.

Playback order may differs from the one played back
using other players.

• “Reading” keeps flashing on the display.

• Readout time varies depending on the USB device.
• Do not use too many hierarchy, folders and empty

folders.*

• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly

while “Reading” is displayed on the display.

* Folder that is phisically empty or folder that contains

data but does not contain valid MP3/WMA/WAV track.

• “No File” flashes on the display.
• “No USB” appears on the display.

Connect a USB device that contains tracks encoded in an
appropriate format.

• “Not Support” appears on the display and

track skips.

The track is unplayable.

• “Read failed” appears on the display.

The connected USB device may be malfunctioning,
or may not have been formatted correctly. The files
included in the USB device are corrupted.

• Correct characters are not displayed (e.g.

album name).

For available characters, see page 33.

• While playing a track, sound is sometimes

interrupted.

The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.

• The sound is interrupted or skipped during

playback of a USB device.

• Turn off, then turn on the unit.
• Connect the device again, when the sound is not yet

restored.

Continued on the next page

EN32-39_KD-G844[UI]f.indd 35

12/26/07 6:09:45 PM