JVC TH-V70 - Manual (Page 53)

48
Changing the VFP setting
The VFP (Video Fine Processor) function enables you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
7 During playback
1 Press VFP (PROGRESSIVE).
The current VFP settings appear on the TV.
Example: When “NORMAL” is selected.
2 Press Cursor 3/2 repeatedly to select the
VFP mode.
Each time you press the button, the VFP mode changes
as follows.
“
NORMAL “ CINEMA “ USER 1 “ USER 2
“ (back to the beginning)
• NORMAL: Normally, select this.
• CINEMA: Suitable for a movie source.
• USER 1 and USER 2: You can adjust parameters that
affect the appearance of
picture and store the settings.
NOTE:
You cannot adjust “NORMAL” and “CINEMA.”
To adjust USER 1 or USER 2
1 Press VFP (PROGRESSIVE), then press Cursor 3/2
repeatedly to select “USER 1” or “USER 2.”
2 Press Cursor ∞/5repeatedly to select a
parameter you want to adjust.
• Adjust gradually to show preferable appearance by
confirming the picture.
• GAMMA:
Controls the brightness of neutral tints while maintaining
the brightness of dark and bright portions (–4 to +4).
• BRIGHTNESS:
Controls the brightness of the screen (–16 to +16).
• CONTRAST:
Controls the contrast of the screen (–16 to +16).
• SATURATION:
Controls the color depth of the screen (–16 to +16).
• TINT:
Controls the tint of the screen (–16 to +16).
• SHARPNESS:
Controls the sharpness of the screen (+0 to +3).
• Y DELAY:
Controls the color gap of the screen (–2 to +2).
3 Press ENTER.
VFP menu disappears, and the following pop-up window
appears on the TV.
4 Press Cursor 5/∞ repeatedly to change the
setting.
5 Press ENTER.
The current VFP settings appear again.
6 Repeat steps 2–5 to adjust other parameters.
To return to the normal screen
Press VFP (PROGRESSIVE).
To activate your setting
Press VFP (PROGRESSIVE), then press Cursor 3/2
repeatedly to select “USER 1” or “USER 2.”
NOTE:
The VFP settings disappear if no operations are done for more than
about 10 seconds.
CHANNEL VOLUME TV VOL
DVD VCR 1
AUDIO
AUX
ANGLE
FM/AM
SUBTITLE DECODE
RETURN DIGEST ZOOM VFP
TOP MENU MENU ZOOM
CONTROL – SUBWOOFER + EFFECT
– CENTER +
– REAR-R +
TEST
SLEEP
TV
VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUND
MODE
FM MODE
1 2 3
4 5 6
7 8 9
10 0 +10
100+
CATV/DBS
TV AUDIO
VCR
SOUND –
+
– REAR-L +
PROGRESSIVE
DVD
SUPER
VCD
VIDEO
CD
VFP
(PROGRESSIVE)
button
Cursor and
ENTER buttons
+0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+0
+0
+0
+0
+3
+0
+0 GAMMA
+0 GAMMA
+0
USER 1
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+0
+0
+0
+0
+3
+0
EN37-50TH-V70[UJ]1 02.3.26, 4:47 PM 48