JVC TH-V70 - Manual (Page 15)

10
Connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the component
you are going to connect.
Connecting a TV
To view pictures and on-screen displays, connect a TV to the center unit.
• Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.
• You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. See page 58.
7
To connect a TV without the component video input jacks
7 To connect a TV with the component video input jacks
If your TV has the component video input jacks, connect it with the component video cord (not supplied) to view a high
quality picture.
• Connect “Y” to “Y,” “P
B ” to “P B ,” and “P R ” to “P R ” correctly.
• If your TV supports the progressive video input, you can enjoy a high quality picture by making the progressive scan
mode active. See page 26.
VIDEO
S-VIDEO
Y P B P R
VIDEO OUT
ANTENNA
DISP.SET
AUX TO SP-PWV70 IN
AC IN
AV
COMPU
LINK
AM COAXIAL
75
AM
R L
H V
FM
EXT
LOOP
DIGITAL IN
OPTICAL
COMPONENT
VIDEO
S-VIDEO
VIDEO
S-VIDEO
Y P B P R
VIDEO OUT
ANTENNA
DISP.SET
AUX TO SP-PWV70 IN
AC IN
AV
COMPU
LINK
AM COAXIAL
75
AM
R L
H V
FM
EXT
LOOP
DIGITAL IN
OPTICAL
COMPONENT
Y P B P R
COMPONENT
To composite video input
To S-video input
Video cord (supplied)
S-video cord (not supplied)
If your TV has S-video (Y/C-separation) jack, connect it using an S-video cord.
By using this jack, you can get a better picture quality than using composite video connection.
• Connect S-video cord by matching the
∞ mark on the plug to the one on the system.
Center unit
TV
To component video input
NOTE:
If the component video input jacks of your TV are of the BNC type, use a plug adapter to convert the pin plugs to BNC plugs (not supplied).
Component video cord (not supplied)
Red
Blue
Green
Center unit
TV
EN1-20TH-V70[UJ]1 02.3.26, 4:45 PM 10