beautypg.com

Connections – JVC SP-THL1W User Manual

Page 13

background image

11

Connections

7 To connect the video components for the source of VIDEO 2

• You can get better picture quality in the order — HDMI > Component video > S-video > Composite video.

NOTE

• Unify the way of TV connection and that of video component’s (for example, connect a video component through S-VIDEO jack

when TV is connected through S-VIDEO jack). Otherwise, the signal from the component is not sent to the TV.

• The audio signal through the HDMI VIDEO 2 IN terminal is not reproduced on this system. The signal is reproduced on the TV

connected with HDMI MONITOR OUT terminal.

• Use an HDMI cable shorter than 5 m.
• When you are playing HDCP (High-Bandwidth Digital Content Protection) content, the sound and picture may not be

transmitted to the speakers and TV for a few seconds at the beginning due to the confirmation process.

• If the component video output jacks of your video components of the BNC type, use a plug adapter (not supplied) to convert the

pin plugs to BNC plugs.

• When shipped from the factory, the source of “VIDEO 2” have been set for use with the AUDIO VIDEO 2 IN terminal for the

audio connection. If you connect the components with digital coaxial audio cord, change the audio input (VIDEO 2) setting to
“DIGITAL.” (See page 31.)

• If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound

output through this system may be distorted.

Connecting the video components for the source of VIDEO 2

Center unit

To HDMI output

HDMI cord

(not supplied)

DVD recorder, DVD player,

satellite tuner, VCR

or game console

To component
video output

Component video cord

(not supplied)

or

S-video cord (not supplied)

To composite

video output

To S-video
output

Composite video cord
(supplied)

Align the

5

marks.

To analog

audio output

To digital coaxial
audio output

RCA pin plug cord
(not supplied)

Digital coaxial audio cord (not supplied)

Do not connect the power cord until all other connections have been made.

TH-L1[U].book Page 11 Friday, July 13, 2007 2:22 PM