Connecting a tv, Connections – JVC SP-THL1W User Manual
Page 11
9
Connections
• You can get better picture quality in the order — HDMI > Component video > S-video > Composite video.
• Distortion of picture may occur when connecting the TV via a VCR, or to a TV with a built-in VCR.
• You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. (See page
29.)
• If your TV supports progressive video input, you can enjoy a high quality picture from the source of “USB MEMORY” by
setting the progressive scanning mode to active and connect your TV with the component video cord. (See page 18.)
• You can use below terminals for each sources to see the picture on the TV.
NOTE
• HDMI MONITOR OUT terminal passes through the signal from the HDMI input terminal (VIDEO 1 and VIDEO 2) selected as
the source.
• COMPONENT MONITOR OUT terminal passes through the signal from the COMPONENT input terminal (VIDEO 1 and
VIDEO 2) selected as the source.
• S-VIDEO MONITOR OUT terminal passes through the signal from the S-VIDEO input terminal (VIDEO 1, VIDEO 2 and
VIDEO 3) selected as the source.
• VIDEO MONITOR OUT terminal passes through the signal from the VIDEO input terminal (VIDEO 1, VIDEO 2 and VIDEO
3) selected as the source.
• Use an HDMI cable shorter than 5 m.
• When you are playing HDCP (High-Bandwidth Digital Content Protection) content, the sound and picture may not be
transmitted to the speakers and TV for a few seconds at the beginning due to the confirmation process.
• If the component video input jacks of your TV are of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to
BNC plugs.
Connecting a TV
Source
Terminal
VIDEO 1
VIDEO 2
VIDEO 3
iPod
USB
MEMORY
HDMI
√
—
—
—
COMPONENT VIDEO
√
—
—
√
S-VIDEO
√
√
√
√
VIDEO
√
√
√
√
Center unit
TV
To HDMI input
HDMI cord (not supplied)
To component
video input
Component video cord
(not supplied)
or
S-video cord
(not supplied)
To composite
video input
To S-video
input
Composite video cord
(supplied)
Align the
5
marks.
Do not connect the power cord until all other connections have been made.
TH-L1[U].book Page 9 Friday, July 13, 2007 2:22 PM