JVC D-ILA DLA-RS60 - Manual (Page 52)

52
Operation
3
Adjustments and settings in the menu (continued)
3D Format Sets the format of the 3D input signal.
Some signals may not be appended with 3D information themselves, and projection may
fail if they are recognized as normal 2D signals.
When this occurs, configure the settings manually.
(*) It is recommended to read "On 3D" (reference page: 53) before watching 3D video
images.
Settings: Auto, Frame Packing, Side by Side, Top & Bottom, 2D [Auto]
Auto Is set automatically.
Frame Packing Select this if the 3D input signal is the frame pack method.
Side by Side Select this if the 3D input signal is the side by side method.
Top and Bottom Select this if the 3D input signal is the top and down method.
2D Projected as a 2D signal.
[2-2] COMP.
(*) It can be set when the COMP. terminal is selected.
Color Space It configures the input signal method of the component input terminal.
Settings: Y Pb/Cb Pr/Cr, RGB [Y Pb/Cb Pr/Cr]
Y Pb/Cb Pr/Cr It is set for the component video image input signal.
RGB It is set for the RGB video image input signal.
[2-3] PC
(*) Setting can be done when selecting a PC terminal.
Auto Alignment The picture position of Tracking and Phase are automatically adjusted.
Tracking Adjusts the size and display of the horizontal direction and display area of the video
images.
(Depending on the signal, there is normally no need to be adjusted.)
Phase Adjusts the flickering and blur of the video images.
(Depending on the signal, there is normally no need to adjustment.)
Picture Position Adjust the display of the picture position.
Horiz. Adjusts the horiz. of the video image.
Vert. Adjusts the vertical position of the image.
[3] Installation
Lens Control To Sub-menu "[3-1] Lens Control"
Pixel Adjust To submenu "[3-2] Pixel Adjust"
Installation Style Matching the state of the projector’s projection, one can switch horizontal and vertical flip
/ forward switch.
Settings: Front, Ceiling Mount (Front), Rear, Ceiling Mount (RE) [Front]
Front Front upright projection mode.
Ceiling Mount (F) Ceiling/front projection mode.
Rear Rear upright projection mode.
Ceiling Mount (R) Ceiling/ rear projection mode.
Keystone In regards to the projection plane, any occurring keystone distortion is adjusted in case
the installation location is inclined.
(*) There may be instances, when the video image - after having corrected keystone
distortion - will not match the screen. The position with a shift correction of 0% position is
an exception.
(*) When there is a 3D input signal, adjustment is not possible.
Horizontal Adjusts the horizontal keystone.
Settings: -40 to 40 [0]
Vertical Adjusts the vertical keystone.
Settings: -30 to 30 [0]
RS50 RS50 RS60