Lighting – Jaguar XK JJM 18 02 30 701 User Manual
Page 72
81
Lighting
R
Dip and main beam projector unit
Caution: It is strongly advised that the
High Intensity Discharge (HID) Xenon
low and high beam projector unit
(D1S35W) is replaced by a Jaguar
Dealer.
1. Remove the headlamp unit, see page
78.
2. Twist and lift off the rear domed cap.
3. Twist the bulb unit counter clockwise
to unlock it. Pull the bulb unit clear of
the headlamp unit.
4. Press the electrical connector release
lever and disconnect the bulb unit.
5. Press the bulb unit adaptor ring catch
and remove the adaptor ring from the
bulb unit.
6. Secure the bulb unit adaptor ring onto
the new bulb (D1S35W) and repeat
the above procedure in the reverse
order. Ensure that the cover is fitted
correctly to retain the water tightness.
JAG0151G
3
2
4
5