Lighting – Jaguar XK JJM 18 02 30 701 User Manual
Page 69
Lighting
78
L
Removal of the headlamp unit
1. Remove the lower headlamp securing
bolt 1 located in the front of the wheel
arch. Turn the steering wheel to the
left, when removing the right-hand
headlamp and to the right when
removing the left-hand headlamp.
2. Open the hood and remove the upper
securing bolts 2.
3. Disconnect the headlamp powerwash
connector by pressing the button and
pulling the pipe apart 3, some washer
fluid may drain from the pipe when it
is disconnected.
4. Release the headlamp locating peg by
lifting the tongue upwards 4.
5. Carefully ease the headlamp unit
forward to gain access to the wiring
multi-plug connector. Release the
connector by pressing upwards on
the release button and pull the wiring
multi-plug from the headlamp 5. Place
the headlamp unit on a flat surface
covered in a soft material to prevent
damage to the unit’s lens.
5
JAG0146G
3
1
4
2
2