Jaguar XK JJM 18 02 30 701 - Manual (Page 53)

Steering Wheel
62
L
Steering Wheel
ADJUSTING THE STEERING
WHEEL
!
WARNING:
Do not adjust the steering wheel whilst
driving.
Caution: Do not use steering wheel
mounted security devices since
movement of the steering wheel in
entry or exit mode could result in
damage to the vehicle (e.g. the
windshield) or possible injury to the
occupant.
The steering wheel can be adjusted for tilt
and reach.
1. Turn the switch to the COLUMN or
AUTO position 1.
2. Move the switch forwards or
backwards to adjust reach.
3. Move the switch up or down to adjust
tilt.
Three steering wheel positions may be
stored and recalled by the driver position
memory system, refer to Memory Setting
on page 139.
The message centre will indicate which
switch position has been selected by
displaying the message COLUMN
ADJUST or COLUMN ADJUST AUTO.
Entry and exit mode
Entry and exit mode provides automatic
movement of the steering column to allow
easier entry to or exit from the vehicle.
Entry and exit mode is selected by setting
the steering column adjustment switch to
the AUTO position 2.
Exit: - If the ignition system is in the
convenience mode position and the
driver’s door is opened, the steering
column will move to the uppermost tilt
position, unless already in that position.
Entry: - When the door is closed and the
Start button is pressed, the steering
column will return to the previous
position.
Notes on entry and exit mode
operation
• If the steering column switch is moved
away from AUTO whilst the steering
column is tilted away, the steering
column will move back to its previous
position when the driver’s door is
closed and the Start button is
pressed.
• If the steering column is adjusted
during entry and exit operation,
steering column movement will stop.
JAG0040G