JVC HD-61G587 - Manual (Page 60)

60
Button Functions
Use either the monitor’s operation or a cable box to select. Set this switch to MONITOR to
operate the monitor. Move the switch to CATV to operate a cable box.
Note:
• See page 25 for information on programming your remote for cable box operation.
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Move the slide switch to VCR or DVD to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 26.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 27.
MONITOR/CATV Slide Switch
VCR/DVD Slide Switch
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 27.
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, monitor/VCR, power on
and power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 26.
VCR Buttons
DVD Buttons
Your remote control includes illuminated buttons for key features like C HANNEL +/- and
V OLUME +/-. Press the L IGHT button to turn the illumination on for 5 seconds.
Light
LCT2065-001B-A ENG.indd 60 LCT2065-001B-A ENG.indd 60 12/18/06 10:11:12 AM 12/18/06 10:11:12 AM