JVC HD-61G587 - Manual (Page 21)

21
This monitor can be used as a computer screen. Use a commercially available D-SUB cable
to connect the monitor's PC INPUT terminal to the computer's analog RGB output terminal. If
you want to listen to the sound from the computer, use a commercially available RCA cable to
connect the INPUT-3 audio input terminal to the computer's audio output terminal.
Connecting to the computer
Monitor Rear Panel
OVER
INPUT-3
PC IN
(D-SUB)
INPUT-1
INPUT-2
INPUT-3
HDMI 1
INPUT-1
INPUT-2
VIDEO
VIDEO
VIDEO
R - AUDIO - L
R - AUDIO - L
R - AUDIO - L
R - AUDIO - L
Y Pb Pr
Y Pb Pr
S-VIDEO
S-VIDEO
OVER
R L
AUDIO
OUTPUT
Notes:
• Refer to your computer manual for a detailed explanation of the connections concerning your
computer.
• Make sure that the connectors are facing the correct way when connecting.
• After connecting, tighten the two screws to fix the connectors in place.
Looking at the images from a computer
After starting the computer, press the INPUT button to choose INPUT-3. You can listen to the
sound when the sound from the computer is connected to the INPUT-3 AUDIO input terminal.
Notes:
• When the sound from the computer is connected to INPUT-3 by choosing external input
INPUT-3, the sound from the computer can be listened to, but the images from the computer
cannot be seen.
Quick Setup
LCT2065-001B-A ENG.indd 21 LCT2065-001B-A ENG.indd 21 12/18/06 10:10:55 AM 12/18/06 10:10:55 AM