JVC HD-61G587 - Manual (Page 44)

44
Onscreen Menus
This feature is used if you have a DTV or HDMI compatible component connected to your
monitor.
Press the M ENU button
π† To DIGITAL-IN AUDIO
è To select ANALOG, DIGITAL or AUTO
Press the Menu button when fi nished
Notes:
• If you connect the HDMI device to the HDMI 1, choose
DIGITAL. If you connect the DVI device to the HDMI 1, choose ANALOG.
• Refer to your DTV or HDMI component’s instruction manual for more information.
• When you select AUTO, the monitor will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
INITIAL SETUP
SELECT OPERATE EXIT MENU
NEXT PAGE
PREVIOUS
(1/4)
DIGITAL-IN
DIGITAL-IN AUDIO
SIZE1
DIGITAL
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
Press the M ENU button
π† To DIGITAL-IN
è To enter
π† To select AUTO, SIZE1 or SIZE2
Press the M ENU button to finish
Digital-In
Digital-in Audio
INITIAL SETUP
SELECT OPERATE EXIT MENU
NEXT PAGE
PREVIOUS
(1/4)
DIGITAL-IN
DIGITAL-IN AUDIO
SIZE1
DIGITAL
Notes:
• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE1" or "SIZE2" automatically.
LCT2065-001B-A ENG.indd 44 LCT2065-001B-A ENG.indd 44 12/18/06 10:11:05 AM 12/18/06 10:11:05 AM