JVC GR-DVP10 - Manual (Page 9)

EN
9
Master Page: Right-start
A
U
TO
MA
TIC DEMONSTRA
TION
Automatic Demonstration takes place when “DEMO
MODE” is set to “ON” (factory-preset).
Ⅲ Automatic Demonstration starts when there is no
operation for about 3 minutes after the Power
Switch is set to “A” or “M” and no cassette is in
the camcorder.
Ⅲ Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minute after that, the demonstration will
resume.
Ⅲ “DEMO MODE” remains “ON” even if the
camcorder power is turned off.
To cancel Automatic Demonstration
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Press MENU. The Menu Screen appears.
4
Press + or – to select “s SYSTEM”, and press
SET/SELECT. The SYSTEM Menu appears.
5
Press + or – to select “DEMO MODE”, and press
SET/SELECT. The Sub Menu appears.
6
Press + or – to select “OFF”, and press SET/
SELECT.
7
Press + or – to select “BRETURN”, and press SET/
SELECT twice. The normal screen appears.
NOTE:
Slide the lens cover down to see the actual changes
of the Automatic Demonstration activated on the
LCD monitor or viewfinder.
Automatic Demonstration
ST M SY E
DE M – MO DE O
N O
OFF
Power Switch
Lock Button
MENU Button
Sub Menu
SET/SELECT Button +, – Button
GR-DVP10PAL.book Page 9 Tuesday, January 6, 2004 10:55 AM