Playback menus, Video menu system menu, Video playback sound – JVC GR-DVP10 User Manual

Page 40: Synchro adjustment, Recording mode, Deleting thumbnail images, Blank search, S-video/av input, System

Master Page: Left-Heading0

PLAYBACK MENUS

VIDEO

Playback sound

During tape playback, the camcorder detects the
sound mode in which the recording was made, and
plays the sound back. Select the type of sound to
accompany your playback picture. According to the
menu access explanation on page 31, select
“SOUND MODE” or “12bit MODE” from the Menu
Screen and set it to the desired parameter.
SOUND MODE

(Factory-preset: STEREO

)

STEREO

: Sound is output on both “L” and “R”

channels in stereo.
SOUND L : Sound from the “L” channel is
output.
SOUND R

: Sound from the “R” channel is

output.

12bit MODE

(Factory-preset: SOUND 1)

MIX: Original and dubbed sounds are combined
and output in stereo on both “L” and “R”
channels.
SOUND 1: Original sound is output on both “L”
and “R” channels in stereo.
SOUND 2: Dubbed sound is output on both “L”
and “R” channels in stereo.

NOTES:

● The “SOUND MODE” setting is available for both

12-bit and 16-bit sound. (In previous models’
functions, “12-bit” is called “32 kHz” and “16-bit”
is called “48 kHz”.)

● The camcorder cannot detect the sound mode in

which the recording was made during fast-forward
or rewind. During playback the sound mode is
displayed in the upper left corner.

Synchro adjustment

For details, refer to “For More Accurate Editing”
(

੬ pg. 61).

SYNCHRO

(Factory-preset: ±0.0)

Recording mode

Allows you to set the video recording mode (SP or
LP) depending on your preference. It is
recommended you use “REC MODE” in VIDEO
Menu when using this camcorder as a recorder
during dubbing. (

੬ pg. 50, 52)

REC MODE

(Factory-preset: SP)

SP / LP

NOTE:
“REC MODE” can be set when the Power Switch is
set to “P” or “M”.

Dubbing from tape to memory card

COPY

(Factory-preset: OFF)

OFF: When the SNAPSHOT button is pressed
during tape playback, the playback image pauses
and normal playback will resume after
approximately 6 seconds. (The still image is not
recorded.)
ON: Enables dubbing of images recorded on a
tape to a memory card. (

੬ pg. 53)

Deleting thumbnail images

For details, refer to “To delete thumbnail images”
(

੬ pg. 47).

NAVI.DEL.

IMAGE SEL. / TAPE SEL. / ALL / RETURN

Blank search

Helps find a blank portion of tape when you want to
record from the middle of a tape. (

੬ pg. 21)

BLANK SRCH

EXECUTE / RETURN

S-Video/AV input