JVC GR-DVP10 - Manual (Page 80)

80
EN
Master Page: Left-Heading0
INDEX Indications (cont.)
Warning Indications
Indications Function
Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator blinks.
When the battery power is exhausted, power turns off automatically.
Appears when no tape is loaded. ( ੬ pg. 15)
CHECK TAPE’S ERASE
PROTECTION TAB
Appears when the erase protection tab is set to “SAVE” while the Power Switch is
set to “A” or “M” and the VIDEO/MEMORY Switch is set to “VIDEO”.
( ੬ pg. 13)
HEAD CLEANING
REQUIRED USE
CLEANING CASSETTE
Appears if dirt is detected on the heads during recording. Use an optional
cleaning cassette.
( ੬ pg. 73)
CONDENSATION
OPERATION PAUSED
PLEASE WAIT
Appears if condensation occurs. When this indication is displayed, wait more
than 1 hour until condensation disappears.
TAPE!
Appears if a tape is not loaded when the Recording Start/Stop Button or
SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and
the VIDEO/MEMORY Switch is set to “VIDEO”.
TAPE END Appears when the tape ends during recording or playback. ( ੬ pg. 64)
SET DATE/TIME!
● Appears when the date/time is not set. ( ੬ pg. 14)
● Appears when the built-in clock (lithium) battery is discharged and the
previously set date/time is erased. ( ੬ pg. 14)
LENS COVER Appears for 5 seconds after power is turned on if the lens cover is not slid down.
A. DUB ERROR! Appears if Audio Dubbing is attempted on a blank portion of a tape. ( ੬ pg. 56)
A. DUB ERROR!
LP RECORDED TAPE>
16bit RECORDING>
ERASE PROTECTION
TAB>
● Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.
( ੬ pg. 56)
● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.
( ੬ pg. 56)
● Appears if A. DUB (D) on the remote control is pressed when the erase
protection tab is set to “SAVE”. ( ੬ pg. 56)
● Appears if Audio Dubbing using Digital Sound Effects is attempted when a
memory card is not loaded. ( ੬ pg. 56)
INSERT ERROR! Appears if Insert Editing is attempted on a blank portion of a tape. ( ੬ pg. 57)
GR-DVP10PAL.book Page 80 Tuesday, January 6, 2004 10:55 AM