beautypg.com

Digital still camera (d.s.c.) recording & playback, D.s.c. recording, Basic shooting (d.s.c. snapshot) – JVC GR-DVP10 User Manual

Page 23

background image

EN

23

Master Page: Right-start

DIGIT

A

L STILL CAMERA (D.S

.C.)

RECORDING

&

PLA

Y

B

A

CK

D.S.C. RECORDING

You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are stored
in the memory card.

NOTE:
Before continuing, perform the procedures listed
below:

Power (pg. 10)

Loading A Memory Card (pg. 16)

1

Slide down the lens cover.

2

Set the VIDEO/MEMORY Switch to “MEMORY”.

3

Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.

4

Open the LCD monitor fully, or pull out the
viewfinder fully.

5

Press SNAPSHOT. The “O” indication
appears while the snapshot is being taken.

● Still images are recorded in the snapshot mode

with no frame.

● To delete unwanted still images, refer to

“Deleting Files” (

੬ pg. 28).

● When you do not want to hear the shutter

sound, set “BEEP” to “OFF”. (

੬ pg. 31, 37)

● To change the Image Size and/or Picture

Quality,

੬ pg. 31, 39.

A Image Size (pg. 39, 78)

B Shooting Icon (pg. 78)

C Card Icon (pg. 78)

D Picture Quality (pg. 39, 78)

E Remaining Number Of Shots (pg. 78)
NOTES:

Even if “DIS” is set to “ON” (pg. 36), the

Stabiliser will be disabled.

If Program AE with special effects (pg. 33) is

engaged, certain modes of Program AE with
special effects are disabled during Snapshot
recording. In such a case, the icon blinks.

If shooting is not performed for approx. 5 minutes

when the Power Switch is set to “A” or “M” and
power is supplied from the battery pack, the
camcorder shuts off automatically to save power.
To perform shooting again, push back and pull out
the viewfinder again or close and re-open the LCD
monitor.

The Motor Drive mode (pg. 42) is disabled

when the VIDEO/MEMORY Switch is set to
“MEMORY”.

When the S/AV/Editing cable is connected to the

S/AV connector, the shutter sound is not heard
from the speaker, however it is recorded onto the
tape.

Still images taken are compliant to DCF (Design

rule for Camera File system). They do not have any
compatibility with devices which are not
compliant to DCF.

Basic Shooting (D.S.C. Snapshot)

Power Switch

Lock Button

VIDEO/MEMORY Switch

SNAPSHOT Button

Snapshot mode with no

frame

There is the sound of a

shutter closing.

5

1

1024

A

B

E

D

C

GR-DVP10PAL.book Page 23 Tuesday, January 6, 2004 10:55 AM