Jacuzzi FUZION BATH SERIES 7260 - Manual (Page 20)

ENGLISH
20
Jacuzzi Whirlpool Bath DE99000A 3/06
RapidHeat TM
Operation
Once the heater is installed and the whirlpool pump is operating, the heating
function is totally automatic. The heater will help maintain the temperature of the
water in the bath.
Vacuum/Pressure Switch
The heater is equipped with a preset vacuum/pressure switch which will not al-
low the heater to turn ON if the pump is not running with water flowing through the
whirlpool system.
High-Limit Switch
The heater includes an exclusive High-Limit switch. This safety circuit will not false trip from hot tap water. It will only turn off
the heater if the thermostat fails. To reset, press the button. If the high-limit trips frequently, contact your Authorized Electrical/
Mechanical Service Provider. Visit our web site at http://www.jacuzzi.com/.
To find service agent listings for:
Electrical or Mechanical Repairs visit http://jacuzzi.com/pdf/ASA.PDF
Finish, Surface, or Shell-Related Repairs visit http://jacuzzi.com/pdf/AFC.PDF
Repair Parts or Accessories visit http://jacuzzi.com/pdf/MPD.PDF
PUSH TO RESET
OVER HEAT
PROTECTION
HIGH LIMIT RESET
HEATER ON
HEATER ON
OPERATING INSTRUCTIONS (cont'd)