Jacuzzi FUZION BATH SERIES 7260 - Manual (Page 14)

ENGLISH
Position the counter on top of the bath to ensure
correct fit and appearance. Make any adjustments that
may be necessary. Remove the counter.
Adhering Counter to Bath
Ensure control panel cord (from underneath) is routed
up through the control panel cutout in the counter and
secured before gluing counter to tub.
Clean any dirt or debris from the bath rim. Do not use
abrasive cleaners.
Where the counter will make contact with top of the
bath rim, apply a bead of silicone sealant (not provided).
CAUTION: Do not use an adhesive or adhesive
sealant to secure the counter to the bath rim. If
maintenance or remodelling is required the counter
may have to be removed. Adhesive will permanently
bond the counter to the bath. This will make removal
difficult and costly and may cause damage to the
counter or bath.
Carefully position the counter onto the bath rim. The
counter will need to be held in place while the sealant
cures. Follow the manufacturer's instructions to deter-
mine time required for curing.
Apply a continuous bead of silicone sealant around
the entire seam between the counter and bath rim. Allow
sealant to skin over or cure before cleaning the counter
or bath.
COUNTER
BATH
Control Panel
cord
COUNTER
BATH
COUNTER
BATH
WEIGHTS
COUNTER
BATH RIM
APPLY
SILICONE
HERE
UNDERMOUNT TUB INSTALLATION INSTRUCTIONS
14
Jacuzzi Whirlpool Bath DE99000A 3/06