JVC HR-DVS3U - Manual (Page 33)

Masterpage:Right-NoTitle0
EN
33
Filename [DVS3U_1a-EN.fm]
Page 33 January 14, 2002 10:51 am
Elapsed Recording Time Indication
1 Set the counter display.
Press DISPLAY/OSD until a counter reading appears on
the front display panel.
2 Reset the counter.
Press C.RESET before starting recording or playback.
● The counter is reset to “0:00:00” and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Tape Remaining Time
Press DISPLAY/OSD until the time remaining on the tape
appears on the front display panel.
● The front display panel shows the tape remaining time with
“ z ” displayed.
● By pressing the DISPLAY/OSD button, you can change the
display to show the counter reading, tape remaining time,
channel position* or clock time.
* Channel position is not displayed during playback.
NOTES:
● When you press DISPLAY/OSD, the on-screen display appears
(
੬
pg. 10) on the TV screen for 5 seconds, then the displays
other than the counter disappears. To clear the counter display,
press DISPLAY/OSD.
● Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
“– –:– –” may sometimes appear, or the display may blink on
occasion.
1 2 3
4 5 6
7 8 9
0
2
4
1
3
T W
DV S-VHS
DVS3U_1a-EN.fm Page 33 Monday, January 14, 2002 10:51 AM