JVC HR-DVS3U - Manual (Page 18)

Filename [DVS3U_1a-EN.fm]
Masterpage:Left
18
EN
Page 18 January 10, 2002 10:49 am
INITIAL SETTINGS (cont.)
Tuner Set Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
A
Turn on the VCR.
Press POWER.
B
Access the Main Menu screen.
Press MENU.
C
Access the Tuner Set screen.
D
Perform Auto Channel Set.
Press
rt
to move the
highlight bar (arrow) to
“AUTO CH SET”, then press
OK or
e
. You can
automatically set the
receivable channels in your
area in the order of their
frequencies.
● When Auto Channel Set is
complete, “SCAN
COMPLETED” appears on the
TV screen.
● If the scan was unsuccessful,
“SCAN COMPLETED–NO
SIGNAL–” appears on screen.
Check the connections and start
again.
E
Return to the normal screen.
Press MENU.
Turn on the TV and select the AV mode.
INFORMATION
The VCR selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be
displayed on the right side of “BAND” on the Tuner Set
screen.
1 2 3
4 5 6
7 8 9
0
2
4
1
3
T W
DV S-VHS
Press
rt
to move the
highlight bar (arrow) to
“TUNER SET”, then press OK
or
e
.
DVS3U_1-EN.book Page 18 Thursday, January 10, 2002 10:51 AM