beautypg.com

Repeat playback, Index search, Playback/recording on vhs deck (cont.) – JVC HR-DVS3U User Manual

Page 30: Start playback, Activate repeat playback, Stop repeat playback, Activate index search

background image

Filename [DVS3U_1a-EN.fm]

Masterpage:Left

30

EN

Page 30

January 10, 2002 10:49 am

PLAYBACK/RECORDING ON VHS DECK (cont.)

Repeat Playback

Your VCR can automatically play back the whole tape 100 times
repeatedly.

1

Start playback.

Press PLAY (

4

).

2

Activate Repeat Playback.

Press PLAY (

4

) and hold for over 5 seconds, then release.

● The Play indicator (

u

) on the front display panel blinks

slowly.

● After playing back a tape 100 times, the VCR stops

automatically.

3

Stop Repeat Playback.

Press STOP (

8

) at any time.

● Pressing PLAY (

4

), REW (

3

), FF (

5

) or PAUSE (

9

) also

stops Repeat Playback.

Index Search

Your VCR automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.

NOTE:

Before starting, make sure the VCR
is in the Stop mode.

Activate Index Search.

Press

w

or

e

(

2

or

6

). “INDEX -1” or “INDEX 1” is

displayed on the TV screen and search begins in the
corresponding direction.

● To access index codes 2 through 9, press

w

or

e

repeatedly

until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press

w

twice.
To locate the beginning of D from the current position, press

e

once.

● When the specified index code is located, playback begins

automatically.

Next Function Memory

The Next Function Memory “tells” the VCR what to do after
rewinding. Before continuing, make sure the VCR is in the Stop
mode.

a- For Automatic Start Of Playback

Press REW (

3

), then press PLAY (

4

) within

2 seconds.

b- For Automatic Power Off

Press REW (

3

), then press POWER within

2 seconds.

c- For Automatic Cassette Ejection After Tape Rewind

Press REW (

3

), then press EJECT ( ) within

2 seconds.

NOTE:

The Automatic Power Off does not work if “AUTO TIMER” is set
to “ON” (

pg. 71) and if any timer programing has been

made. If “AUTO TIMER” is set to “ON”, the VCR directly goes
into the Timer-Standby mode at the same time when the POWER
is pressed for the Automatic Power Off.

1

2

3

4

5

6

7

8

9

0

2

4

1

3

T

W

DV

S-VHS

1

3

2

INDEX 1

Current position

Index number

DVS3U_1-EN.book Page 30 Thursday, January 10, 2002 10:51 AM