JVC DLA-SH4KNL - Manual (Page 67)

19
Ⅵ Connection During Single-Screen Mode Display
Below is the connection example for four-channel signals from the computer.
For two-channel signals from the computer, connect to the [DVI 1] and [DVI 3] terminals of this projector.
NOTE:
● Depending on your DVI-D cable, the signal may attenuate and the image become unstable.
● Use of DVI-D cables compliant with the DDWG standard is recommended.
DVI 3 DVI 1 DVI 1
DVI 4 DVI 3 DVI 2 DVI 1 DVI 1
DVI 4 DVI 3
DVI 2
Normal 2 Stripes
4 Stripes Cross
CONTROL
OPERATE I/ B
DVI 3
USB
LAN
RS-232C
STANDBY/ON
LAMP
WARNING DVI 4
DVI 1
DVI 2
DVI-D Cable (Sold Separately)
To DVI Terminal
Desktop Computer
DLA-SH4KNL_EN.book Page 19 Thursday, June 12, 2008 4:25 PM