JVC DLA-SH4KNL - Manual (Page 40)

40
Others
Messages are displayed when the lamp life has expired and when there is input of signals that cannot be used.
What to do when these
messages are displayed
Message Cause (Details)
Lamp Time Over
● Displayed when the lamp time has exceeded 1500 hours.
The message is displayed for a period of 3 minutes during each
projection.
N Replace with a new lamp unit.
For details on replacement of the lamp unit, please consult your
authorized dealer.
Out of Range
● When there is input of video signals that cannot be used with this
unit
N Input video signals that can be used.
No Input
● When no device is connected to the input terminal
● When the input terminal is connected but there is no signal
N Input the video signals.
Lamp Time Over
Message
DLA-SH4_EN.book Page 40 Tuesday, January 15, 2008 6:07 PM