Clock set, Subsidiary settings (cont.), Turn on the recorder – JVC HM-HDS1EU User Manual
Page 88: Access the main menu screen, Access the initial set screen, Access the clock set screen, Important
Filename [HDS1EU_5.fm]
Masterpage:Left
88
EN
Page 88
June 21, 2001 12:30 pm
SUBSIDIARY SETTINGS (cont.)
Clock Set
A
Turn on the recorder.
Press
1
.
B
Access the Main Menu screen.
Press MENU.
C
Access the Initial Set screen.
D
Access the Clock Set screen.
Press
rt
to move the highlight bar (pointer) to “CLOCK
SET”, then press OK or
e
. The Clock Set screen appears.
NOTE:
When you have selected MAGYARORSZÁG (36),
C
ESKÁ
REPUBLIKA (42), POLSKA (48), or OTHER EASTERN EUROPE
(EE) for the country setting (
੬
pg. 14, 18), you cannot use Just
Clock function. Skip steps
F and G on page 89.
Turn on the TV and select the AV mode.
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set “ON” or “OFF” at the Clock
Set screen (the default setting is “OFF”). Press OK until the
Just Clock setting begins blinking, then press
rt
to change
the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your
recorder’s built-in clock may be reduced, which could
adversely effect timer recording. We recommend you to keep
Just Clock on. In cases where the clock setting data from a
PDC signal is incorrect, however, you are advised to keep
Just Clock set to “OFF”.
IMPORTANT
If you performed Auto Set Up (
੬
pg. 14), Preset Download
(
੬
pg. 16) or Auto Channel Set (
੬
pg. 80), without ever
having set the clock previously, the recorder’s built-in clock is
also set automatically.
Perform the following steps only if —
—Auto Clock Set has not been performed correctly by Auto
Set Up, Preset Download or Auto Channel Set.
OR
—the recorder’s memory backup has expired.
OR
—you want to change Just Clock setting (
੬
“Just Clock” in
the left column).
A Press
w
e
to move the
arrow to “INITIAL SET
UP”, then press
t
or OK.
B Press
w
e
to move the
arrow to “INITIAL SET”,
then press OK.
HDD/VCR SET UP
INITIAL SET UP
FUNCTION SET UP
SELECT OK EXIT
THEN PRESS [OK]
TUNER SET
INITIAL SET
INDEX
MENU
INITIAL SET
CLOCK SET
GUIDE PROG SET
SAT CONTROL SET
SELECT WITH
HDS1EU_.book Page 88 Thursday, June 21, 2001 12:30 PM