JVC HM-HDS1EU - Manual (Page 83)

Masterpage:Right-NoTitle0
EN
83
Filename [HDS1EU_5.fm]
Page 83 June 21, 2001 7:15 pm
F
Input the channel.
Press the number keys to input the channel number you
want to store.
● Input “0” before any single number entries.
● To input the registered station name (ID – ੬
pg. 87), press
e
until “– – – –” (ID setting) begins blinking, then press rt .
● For fine tuning adjustment, press e until “+/–” begins blinking,
then press rt . While tuning, “+” or “–” appears.
● When storing a channel that sends scrambled broadcasts,
press
e
until “OFF” (Decoder setting) blinks, then press
rt
to set “DECODER” to “ON” (“OFF” is the default setting).
● When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER”
setting cannot be changed (
੬
pg. 65).
G
Enter new channel information.
Press OK and the Confirmation screen appears.
● Repeat steps D – G as necessary.
H
Close the Confirmation screen.
Press MENU.
● To change positions, see “Change Station Channel Position”
(
੬
pg. 84).
● If you wish to set station names other than the ones registered
in your recorder, see “Set Stations (B)” (
੬
pg. 85).
Delete A Channel
A
Select the item.
Press rt w e until the item you want to delete begins
blinking.
B
Delete a channel.
Press & .
● The item directly beneath the cancelled one moves up one
line.
● Repeat steps A and B as necessary.
C
Close the Confirmation screen.
Press MENU.
ATTENTION
Guide Program numbers are not set when channels are
stored manually. If an attempt is made at timer programming
with the S
HOW V IEW system in this state, “SET GUIDE PROG
THEN RETRY” appears on the TV screen; set the Guide
Program Numbers (
੬
pg. 79) manually.
Perform steps A and C of “Manual Channel Set” on page 82
to access the Confirmation screen before continuing.
HDS1EU_5.fm Page 83 Thursday, June 21, 2001 7:16 PM