JVC HM-HDS1EU - Manual (Page 17)

Masterpage:Right-Full-NoTitle0
EN
17
Filename [HDS1EU_2.fm]
Page 17 June 21, 2001 12:25 pm
Results of Auto Set Up/Preset Download appear on the front display panel
If both Auto Channel Set and Auto Clock Set have been performed successfully, the
correct current time is displayed.
Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored
in the recorder’s memory by using the PR button(s).
● If station names (ID – ੬
pg. 87) have also been stored in the recorder’s memory, the station name
will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is
tuned to a different station.
● If you want to set the tuner manually such as to add or skip channels, to change channel
positions, or to set or change station names, see pages 82 – 87.
If Auto Channel Set has succeeded but Auto Clock Set has not, “1” (channel position) is
displayed.
A Turn on the TV and select its AV mode, then make sure that all necessary stations have been
stored in the recorder’s memory by using the PR button(s).
● If station names (ID – ੬
pg. 87) have also been stored in the recorder’s memory, the station name
will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is
tuned to a different station.
● If you want to set the tuner manually such as to add or skip channels, to change channel
positions, or to set or change station names, see pages 82 – 87.
B Perform “Clock Set” on page 88.
If both Auto Channel Set and Auto Clock Set have failed, “– –:– –” is displayed.
Make sure the cables are connected properly and turn off the recorder’s power once, then turn the
recorder’s power back on again.
The Country Set display appears on the front display panel and/or on the TV screen; perform “Auto
Set Up” on page 14 or “Preset Download” on page 16 again.
IMPORTANT
● To check if the Guide Program numbers have been set correctly, perform the S
HOW V IEW Timer Programming (
੬
pg. 42).
● In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work
properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the S HOW V IEW
system, the recorder will record a TV programme of a different station. When programming the timer using the S HOW V IEW
system, be sure to check the desired channel is selected correctly (
੬
pg. 42, “S HOW V IEW ® Timer Programming”).
● Your video recorder memorizes all detected stations even if reception of some of them is poor. You can delete those stations with
an unacceptable picture (
੬
pg. 83, “Delete A Channel”).
INFORMATION
Language for the on-screen display
Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made in
step
B on page 14 (unless you have selected BELGIUM or SUISSE), as shown below.
If you want to change the language setting manually, see “Language” on page 18.
Just Clock
Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at
regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON”
(
੬
pg. 88, “Just Clock”).
SUOMI ] SUOMI DANMARK ] DANSK NEDERLAND ] NEDERLANDS
PORTUGAL ] ENGLISH ÖSTERREICH ] DEUTSCH GREECE ] ENGLISH
DEUTSCHLAND
]
DEUTSCH CESKÁ REPUBLIKA ]
ENGLISH OTHER WESTERN EUROPE
]
ENGLISH
POLSKA ] ENGLISH ITALIA ] ITALIANO OTHER EASTERN EUROPE ] ENGLISH
NORGE
]
NORSK MAGYARORSZÁG
]
ENGLISH
SVERIGE
]
SVENSKA ESPAÑA
]
CASTELLANO
HDS1EU_.book Page 17 Thursday, June 21, 2001 12:30 PM