JVC HM-HDS1EU - Manual (Page 29)

Masterpage:Right-NoTitle0
EN
29
Filename [HDS1EU_2.fm]
Page 29 June 21, 2001 7:05 pm
Recording Features
Record One Programme While
Watching Another
Once recording is in progress, all you need to do is to set
the channel controls on the TV for the station you wish to
view.
● The programme selected with the TV’s channel controls
appears on the TV screen, while the one selected with the
recorder’s PR buttons is recorded on the tape.
● If a decoder is connected to the recorder ( ੬
pg. 72), you can
select a scrambled channel as well with the TV channel
controls.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
1 Start recording.
Press 7 on the recorder.
2 Engage the ITR mode.
Press 7 again. “ o ” blinks and “0:30” appears on the front
display panel.
3 Set the recording duration.
If you want to record for more than 30 minutes, press 7
to extend the time. Each press extends recording time by
30 minutes.
NOTE:
You can only perform ITR using the 7 button on the recorder’s
front panel.
Receiving Stereo and Bilingual
Programmes
Your recorder is equipped with a Sound-Multiplex decoder (A2)
and a Digital stereo sound decoder (NICAM) making reception
of stereo and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
NOTE:
“O.S.D.” must be set to “ON” or the on-screen displays will not
appear (
੬
pg. 78).
To Record Stereo and Bilingual Programmes (A2)
Stereo programmes are automatically recorded in stereo.
● Bilingual programmes are automatically recorded in bilingual.
To Record NICAM Bilingual Programmes
Set “AUDIO REC” to “NICAM” to record the NICAM bilingual
programme (
੬
pg. 75).
NOTES:
● If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
● Before playing back a programme recorded in stereo, or a
bilingual programme, refer to “Soundtrack Selection” on
page 28.
Type of Broadcast Being
Received
On-screen Display
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
NICAM FM Sound
I
NICAM
N I . I N I .
NICAM
NICAM
HDS1EU_2.fm Page 29 Thursday, June 21, 2001 7:07 PM