Playback with vcr navigation, Recording/playback on vhs deck (cont.) – JVC HM-HDS1EU User Manual

Page 32

Filename [HDS1EU_2.fm]

Masterpage:Left

Page 32

June 21, 2001 3:37 pm

RECORDING/PLAYBACK ON VHS DECK (cont.)

Playback with VCR
Navigation

The VCR Navigation enables you to seach and select the desired
programmes recorded on the VHS deck very easily.
When you record a programme with the VHS deck for more than
8 minutes in SP mode (for more than 15 minutes in LP mode or
for more than 23 minutes in EP mode) with “NAVIGATION” set
to “ON” (

੬

pg. 75), its information are registered for the VCR

Navigation automatically.
When the first programme is recorded on a cassette, the VCR
Navigation gives the register number to the cassette. The VCR
Navigation memorizes the cassette by the number. You can
confirm the register number of the cassette when the cassette is
loaded or ejected.
The VCR Navigation can register up to 2000 programmes or up
to 680 cassettes.

The following screen appears as the VCR Navigation screen when you press NAVIGATION with the VHS deck selected.
You can move the arrow to select the desired position on the screen by pressing

on the remote control (or

on the recorder).

The Icons and their meanings

A Loaded cassette number

B Date when the loaded cassette registered

C Index

(Small still picture of the each programme)

D Operational commands

E 3 ways to navigate

(By the recording date, category and cassette number)

F Total time and blank time of the loaded cassette

(Based on the recording speed currently selected)

G Recording information for the programme indicated by

the arrow

H Icons

(Indicate the recording situation for each programme.)

I Guidance for operations

0001

DATE