Output/input set, L-1 output and l-1 input setting, Editing (cont.) – JVC HM-HDS1EU User Manual
Page 64: Access the main menu screen, Access the input/output set screen, Return to the normal screen
Filename [HDS1EU_4.fm]
Masterpage:Left
64
EN
Page 64
June 21, 2001 12:29 pm
EDITING (cont.)
Output/Input Set
L-1 OUTPUT and L-1 INPUT Setting
The AV1 (L-1) IN/OUT connector accepts and delivers either a
composite signal (regular video signal) or a Y/C signal (a signal
in which the luminance and chrominance signals are separated).
Set “L-1 OUTPUT” and “L-1 INPUT” to the appropriate mode
depending on the type of appliance connected to the recorder’s
AV1 (L-1) IN/OUT connector.
A
Access the Main Menu screen.
Press MENU.
B
Access the Input/Output Set screen.
A Press
w
e
to move the arrow to “FUNCTION SET UP”,
then press
t
or OK.
B Press
w
e
to move the arrow to “INPUT/OUTPUT”,
then press OK.
C
Select the output or input mode for the AV1
(L-1) IN/OUT connector.
D
Return to the normal screen.
Press MENU.
NOTES:
● If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set
“L-1 INPUT” to “S-VIDEO”.
● If “L-2 SELECT” is set to “DECODER”, it is impossible to set
“L-1 INPUT” to “S-VIDEO”.
A Press
rt
to move the
arrow to “L-1 OUTPUT”
or “L-1 INPUT”, then
press OK.
B Press
rt
to select the
appropriate setting, then
press OK.
* The default setting is bold in
the table below.
8
L-1 OUTPUT
VIDEO:
If a connected appliance’s input is
compatible only with regular video
signals, set to “VIDEO”.
S-VIDEO:
If a connected appliance’s input is
compatible with Y/C signals, set to
“S-VIDEO”. You can obtain
high-quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)
8
L-1 INPUT
VIDEO:
If a connected appliance’s output is
compatible only with regular video
signals, set to “VIDEO”.
S-VIDEO:
If a connected appliance’s output is
compatible with Y/C signals, set to
“S-VIDEO”. You can obtain
high-quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)
HDD/VCR SET UP
INITIAL SET UP
FUNCTION SET UP
L-1 OUTPUT
VIDEO
L-1 INPUT
VIDEO
L-2 SELECT
A/V
F-1 INPUT
VIDEO
INPUT/OUTPUT
FUNCTION
SELECT OK EXIT
THEN PRESS [OK]
INDEX
MENU
SELECT WITH
VIDEO
S-VIDEO
HDS1EU_.book Page 64 Thursday, June 21, 2001 12:30 PM