JVC TH-M45 - Manual (Page 46)

Advanced operations
43
You can play up to 99 titles
(for DVD) or tracks (for other
types of discs) in any order
from among multiple discs. You may program the same title or
track more than once.
7 While stopped
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor !/ to move
0
to .
3
Press ENTER.
The program menu appears on the TV screen.
• 10 orders appear at a time.
4
A
: When programming titles/tracks of DVD/Video CD/
SVCD/Audio CD
Press number buttons (1-10, +10) to
specify selections by disc and title/
track.
• At each program order use number buttons to specify source
disc number first, press ENTER, then specify title/track
number on source disc.
Example: To specify “title 3/track 3” of “disc 2”
Press 2
] ENTER* ] 3
* You can also use any number buttons instead of ENTER.
(A number entered for a group number is invalid.)
When you specify the currently selected disc number
(
A pg. 25), H skips group number column and moves to
track number column automatically.
B
: When programming tracks of MP3 disc
Press number buttons (1-10, +10) to
specify selections by disc, group and
track.
• At each program order use number buttons to specify source
disc number first, specify group number, then specify track
number on source disc.
Example: To specify “track 14” in “group 2” of “disc 3”
Press 3
] 2 ] +10 ] 4
5
Repeat step 4 to program following
orders.
Each time you enter a title/track number in the order at the
bottom of the program menu, the program menu scrolls and
the following orders appear.
To erase an order
Press Cursor
//5 to move H to the order to be erased, then
press CANCEL.
6
Press
! (play button) to start Program
Playback.
When all of the programmed titles/tracks have been played
back, playback stops and the program menu appears again.
Note that program setting remains.
When playing back an Audio CD:
The program menu remains on the TV screen during Program
Playback.
To check the program contents
During playback, press
7. Playback stops and the program menu
appears.
To bring up the menu without stopping playback, carry out steps 1
to 3.
• You can also check playback status in the on-screen bar by
pressing ON SCREEN.
To stop Program Playback
Press
7. Note that program setting remains.
To clear the program
While stopped and the program menu is shown on the TV screen,
press
7.
All of the programmed titles/tracks are erased. You can also clear
the program by turning off the system.
To quit the Program mode
After clearing all programmed titles/tracks, press
3 (play button).
The program menu disappears.
NOTE
• During Program Playback, you cannot edit program contents.
• During Program Playback, pressing
¢ skips to the next program
selection. Pressing 4 returns playback to the beginning of the
current selection.
• The Resume function cannot be used with Program Playback.
• To close the program menu:
Press ON SCREEN. The program menu is closed and the on-screen
bar is shown.
• To turn off the on-screen bar:
Press ON SCREEN repeatedly.
• Program Playback function cannot be used during Video CD/SVCD
playback with PBC function.
• If you want to repeat the programmed titles/tracks, set the Repeat
mode during Program Playback. ( A pg. 44)
• Program Playback may not work for some discs.
Program Playback
(play button)
Number buttons
Cursor
( 3 / 2 / / / 5 )
/ENTER
Example for 4 A
Example for 4 B
Selected group number
Selected disc number
Selected title/track
number
TH-M65-55-45[J]-08Advanced.fm Page 43 Monday, March 24, 2003 8:53 PM