JVC TH-M45 - Manual (Page 39)

Advanced operations
36
2
Use number buttons (0-10, +10) to enter
the desired title or group number.
The system starts playback from the first chapter/track/file of
the selected title/group.
Example:
To select 8: Press 8.
To select 10: Press 10.
Or press +10, then 0.
To select 20: Press +10, then 10.
Or press +10 twice, then 0.
To select 25: Press +10 twice, then 5.
• Specify the number within 5 seconds after pressing TITLE/
GROUP (i.e. while the display window shows “_ _” for the
title/group number, instead of the current number).
• You can also specify the desired chapter/track/file by using
number button. ( A pg. 26)
NOTE
• This function may not work for some DVDs.
Locating a desired position by specifying
the time
You can start playing at your desired
position by specifying the elapsed
playing time from the beginning of
the current title (for DVD), or from the beginning of the disc (for
Video CD/SVCD/Audio CD).
% For DVD:
During playback
For Video CD/SVCD:
While stopped or during playback without PBC function
For Audio CD:
During playback or while stopped
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor
3/2 to move
H
to .
3
Press ENTER.
The following pop-up window appears under the selected item.
4
Use number buttons (0-9) to enter the
time.
Example:
To play back from a point 2 (hours): 34 (minutes): 08
(seconds) elapsed
To correct a misentry
Press Cursor
repeatedly until the wrong number is erased,
then press number buttons to enter the correct numbers.
5
Press ENTER.
The system starts playback from the specified time.
To turn off the on-screen bar
Press ON SCREEN.
NOTE
• You can also use the 10 button to enter “0”.
• The +10 button is not used by this function.
• You can specify time in hours/minutes/seconds for DVD and in
minutes/seconds for Video CD/SVCD/Audio CD.
You can search and play desired groups and tracks using the MP3
control display.
7 MP3 control display
The MP3 control display appears on the TV screen and playback
starts when a MP3 disc is selected.
* Elapsed playing time of current track
Elapsed playing time is only shown during playback.
% During playback
1
Press Cursor
//5 to select the desired
group.
2
Press Cursor
3 to select the track list.
3
Press Cursor
//5 to select the desired
track.
The playback starts from the selected track.
If you select the track while stopped
Press ENTER or
! (play button) to start playback of the selected
track.
Press 2 Press 3
Press 4
Press 8
Press 0
Using the MP3 control
display
Total group number on
disc
Current track
Current group
Current track
number
Total track number on
disc
Total track number in
current group
Current group
number
*
Number buttons
(play button)
Cursor
( ! / 2 / / / 5 )
/ENTER
Continued on next page
TH-M65-55-45[J]-08Advanced.fm Page 36 Monday, March 24, 2003 4:00 PM