JVC DR-MV5SE - Manual (Page 83)

Masterpage:Right+
EN
83
Filename [MV5S_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 83Wednesday, 31 August 2005 16:55
Guide Program Number Set
1
Press SET UP to access the Main Menu screen.
2
Press w e to select “INITIAL SET UP”, then press t.
3
Press w e to select “GUIDE
PR”, then press t.
4
Press rt to select “GUIDE
PROGRAMME”, then press
ENTER.
5
Press rt to select the Guide
Program number for the desired
station as shown in the TV
listings. Then press ENTER.
● To change the Guide Program number in 10 increments, press and
hold rt.
6
Press rt to select “TV PROGRAMME”, then press ENTER.
7
Press rt to select the number of the unit’s channel position on
which the Guide Program number’s broadcast is received by the
unit or the satellite receiver. Then press ENTER.
● If the satellite broadcast is received on your unit’s auxiliary channel
“L-2”, select “L-2” for the channel position.
● Repeat steps 4 and 7 as necessary.
8
Press SET UP to complete the setting.
Guide Program Number
“Guide Program (GUIDE PROGRAMME) number” refers to the
assigned TV station numbers, according to broadcast area, for the
S
HOW V IEW timer recording. The Guide Program numbers can be
found in most TV listings.
S
HOW
V
IEW TM System Setup
IMPORTANT:
Normally, Auto Set Up (
੬ pg. 17), Preset Download (੬ pg. 18) or
Auto Channel Set ( ੬ pg. 84) sets the Guide Program numbers
automatically. You need to set the Guide Program numbers manually
only in the following cases.
● When timer-programming with the S
HOW V IEW system, the channel
position, where the station you wish to record is received on your
unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download or Auto
Channel Set has taken place,
—Set the Guide Program number for that station manually.
● When you wish to timer-record a satellite programme with the
S HOW V IEW system,
—Set the Guide Program numbers for all satellite broadcasts received
on your satellite receiver.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
ENTER
VHS
SET UP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
EXIT
OK
SELECT
SET UP
DVD SET UP FUNCTION SET UP INITIAL SET UP
AUTO CH SET MANUAL CH SET GUIDE PR CLOCK SET
1
F-1
GUIDE PROGRAMME
TV PROGRAMME
MV5S_00.book Page 83 Wednesday, August 31, 2005 4:55 PM