Recording resume function, Pg. 27, See “recording mode – JVC DR-MV5SE User Manual

Page 27: Pg. 27)

Masterpage:Right+

Filename [MV5S_07Basic PlayRec.fm]

BASIC RECORDING

Page 27Wednesday, 31 August 2005 16:55

NOTES:

● It is recommended to format a DVD-RAM disc before use if

you use the disc on this unit for the first time.

● When using a brand-new DVD-RW disc, format the disc

either in VR mode or in Video mode. (

੬

pg. 89)

● Recordings made on DVD-R/RW disc must be finalised to

play back on other DVD players. Perform “Finalise A Disc
(DVD Deck Only)” (

੬

pg. 90).

● You can record up to 99 programmes and 999 play lists on

each disc.

● Some programmes can only be recorded one time.

● When recording is started, an index of the first part of

recording is automatically recorded. (

੬

pg. 65) To record

satellite programmes, refer to page 36. To delete the index,
refer to page 67.

● Recording sometimes may stop or cannot be performed even

if there is enough available capacity remaining on the disc.

Recording Mode

MPEG2 format is used as recording format. As a guide for
picture quality, the “bps” unit is used to represent how much
data can be recorded per second. The larger this value is,
the better the picture quality becomes but more capacity is
required for the recording. Select XP or SP for programmes
where quick movement occurs, such as sports
programmes, and LP or EP for talk shows, etc. with
relatively less movement.
The recording modes for a 4.7 GB disc are set as follows:

* For details on FR mode, refer to “Free Rate Function” (

੬

pg. 62).

Recording Resume Function

If there is a power outage during recording, Instant Timer
Recording (ITR) (

੬

pg. 61) or timer recording (

੬

pg. 29,

31), the recording will resume automatically when power is
restored to the unit unless the unit’s memory backup has
expired.

Recording

mode