System connections, Connecting to a satellite receiver, Simple connections – JVC DR-MV5SE User Manual

Page 76: Perfect connections (recommended), Pg. 76)

Filename [MV5S_12RemoSys.fm]

Masterpage:Left0

Page 76

Wednesday, 31 August 2005 16:55

SYSTEM CONNECTIONS

Simple Connections

This is an example of a simple connection if your TV has one
21-pin AV input (SCART) connector.
Connect the satellite receiver to the [L-2 IN/DECODER] connector,
then connect the [L-1 IN/OUT] connector to the TV’s connector.

NOTES:

● Set “L-2 SELECT” to “VIDEO/RGB” or “S-VIDEO/RGB”. (

੬ pg. 45)

● You can use the Automatic Satellite Programme Recording function

(

੬ pg. 36) with this connection. (DVD deck only)

● To record a programme via the satellite receiver, select L-2 mode by

pressing PR +/– so that “L-2” appears on the front display panel.

● For details, refer to the instruction manual of the satellite receiver.

Perfect Connections (Recommended)

This is an example of recommended connections if your TV
has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector if you
have a decoder, [L-1 IN/OUT] connector to TV’s connector, and [L-
2 IN/DECODER] connector to the satellite receiver’s connector.
Then connect the satellite receiver and TV.

NOTES:

● Set “L-2 SELECT” to “VIDEO/RGB” or “S-VIDEO/RGB”. (

੬ pg. 45)

● You can use the Automatic Satellite Programme Recording function

(

੬ pg. 36) with this connection. (DVD deck only)

● To record a programme via the satellite receiver, select L-2 mode by

pressing PR +/– so that “L-2” appears on the front display panel.

● To receive a scrambled broadcast, descramble the signal with the

decoder connected to the satellite receiver.

● For details, refer to the instruction manual of the satellite receiver and

decoder.

Connecting To A Satellite Receiver

IMPORTANT
When you set “L-2 SELECT” to “SAT VIDEO/RGB” (

੬ pg. 45), it

is possible to view a satellite broadcast with the TV set to its AV
mode even if the unit is turned off. When the unit is in Stop mode
or recording, press TV/VIDEO on the remote control to turn off
the video indicator (

) on the unit.

● If you turn on the unit when the satellite receiver’s power is off,

nothing appears on the TV screen. In this case, turn on the satellite
receiver, or set the TV to its TV mode, or press TV/VIDEO on the
remote control to set the unit to the AV mode.

Outdoor unit

Satellite cable

Satellite receiver

Aerial

TV aerial cable

ANTENNA OUT

ANTENNA IN