Regular play – JVC CA-V888T User Manual

Page 36

English

LVT0024-001A

[ U, UF ]

One Touch Play

—————————————————————————

❏ Press the TAPE button.

The power comes on and “TAPE” lights up on the display. If there is a tape in the deck corre-
sponding to the Deck indicator DECK A/B, that tape starts to playback. If there is no tape in the
deck corresponding to the Deck indicator, the CA-V888T automatically turns on the power and
displays “TAPE” then the message “NO TAPE” and waits for you to insert a tape or select
another function.

❏ Press the

¤ or ‹ button (or the ™ or £ button on the Remote Control).

The power comes on and “TAPE” appears in the display. When a tape is already in the tape
deck, the tape is played in the direction of the button pressed. If there is no tape in the deck
corresponding to the Deck indicator, the CA-V888T automatically turns on the power and
displays “TAPE” then the message “NO TAPE” and waits for you to insert a tape or select
another function.

Regular Play

If the power is already on, you can use this basic procedure:

Press the

0 button for the deck you want to use.

When the cassette holder opens, put the cassette in, with the exposed part of the tape down,
toward the base of the CA-V888T.
❏ If the cassette holder does not open, turn the Unit off, then back on and press the

0 button

again.

Close the holder gently.
When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected.
To change the selected deck, press the DECK A/B button.
When using the Remote Control, press the A or B button.

Press the

¤ or ‹

‹

‹ button (or ™

™

™ or £

£ button on the Remote Control).

The tape is played in the direction of the button pressed for the selected deck.
❏ The Cassette Deck automatically stops when one side of a tape has finished playing.

To stop playing, press the

7 button.

To remove the tape, stop the tape, and press the

0 button.

To change deck while playing a tape, press the

¤ or ‹ button after pressing the DECK A/B

button on the Unit or press the

™ or £ button after pressing the A or B button on the Remote

Control.

Fast Left and Fast Right ——————————————————————

❏ While the tape is stopped, press the

1 button and the tape will wind rapidly onto the left side of

the cassette without playing.

❏ While the tape is stopped, press the

¡ button and the tape will wind rapidly onto the right side of

the cassette without playing.

Note: Deck A and Deck B cannot be used for playback at the same time.

DECK A/B