JVC CA-V888T - Manual (Page 30)

26
English
LVT0024-001A
[ U, UF ]
Note: Press the DISC buttons (1-3) to cancel Random play and begin playback in Continuous Play
mode.
❏ Press the REPEAT button before or during random play to instruct the CA-V888T to continue
with a different random track selection after the last selection is played.
To cancel random play, press the 7 (RETURN) button, then press the PROGRAM/RANDOM
button to select other mode.
Repeating a Track or the Discs
You can have all the discs, the program or the individual track currently playing repeat as many
times as you like.
Press the REPEAT button on the CA-V888T while the disc is stopped.
The display changes with each press of the button, as shown below.
→ REPEAT ALL → REPEAT 1 CD → REPEAT 1 → blank display → (back to the beginning)
REPEAT ALL: Repeats all the tracks on the CD’s in the CD Player, or all the tracks in the program.
REPEAT 1 CD: Repeats all the tracks on one CD.
REPEAT 1: Repeats one track on a CD.
❏ “REPEAT ALL” and “REPEAT 1” remain on the display even when you change the play mode.
❏ The three Repeat Modes above can be selected during Continuous Play, however, during
Program Play and Random Play, you can only select REPEAT ALL or REPEAT 1.
To exit Repeat Mode, press the REPEAT button until the Repeat mode indicator on the display goes out.
Tray Lock Function
In order to safely keep the discs in the CD Player, the three trays can be electronically locked in a
single operation.
When the electronic lock is on, the trays cannot be opened even if the
0 button is pressed.
This function can only be accessed by using the buttons on the Unit itself.
Locking the Electronic Lock —————————————————————
1.
Put the CA-V888T’s power into STANDBY mode.
2.
While pressing the 7 7 7 7 7 (RETURN) button, press the 0 0 0 0 0 button for DISC 1’s tray on the Unit.
“LOCKED” appears on the display to let you know that the trays have been locked.
When the CD Player trays are locked, pressing the 0 buttons displays the message “LOCKED”
on the display and the trays do not open. But, the
0 button can be used to automatically turn on
the power.
Unlocking the Electronic Lock ————————————————————
1.
Put the CA-V888T’s power into STANDBY mode.
2.
While pressing the 7 7 7 7 7 (RETURN) button, press the 0 0 0 0 0 button for DISC 1’s tray on the Unit.
When the unlock operation is done, “UNLOCKED” appears in the display to show that the lock
has been taken off.
The trays can now be opened by pressing the 0 buttons.
The 0 button can also be used to automatically turn on the power.
REPEAT
DISC
DISC
DISC