JVC CA-V888T - Manual (Page 20)

16
English
LVT0024-001A
[ U, UF ]
Using the Tuner
You can listen to both FM and AM stations. Stations can be tuned in manually, automatically, or
from preset memory storage.
❏ Before listening to the radio:
• Check that both the FM and AM antennas are firmly connected. (See page 4, 5.)
Setting the AM Tuner Interval Spacing ————————————————
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing. Europe, the
U.K., Australia, and some other areas use 9 kHz spacing, while Canada, the United States, and some
other Western Hemisphere countries use 10 kHz spacing.
❏ When shipped, the CA-V888T is set to 9 kHz spacing.
❏ To select the 10 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
the POWER button while moving the MULTI CONTROL stick to the right.
❏ To change back to 9 kHz, be sure that the Unit is in STANDBY mode. Turn on by pressing the
POWER button while moving the MULTI CONTROL stick to the left.
One Touch Radio —————————————————————————
Just press the FM/AM button (or the TUNER button on the Remote Control) to turn on the Unit and
start playing the most recent station tuned in.
❏ You can switch from any other sound source to the radio by pressing the FM/AM button (or the
TUNER button on the Remote Control).
When the CA-V888T is being used, the display shows other items as well.
However, we have only shown the items described in this section.
MULTI CONTROL
Display
SLEEP CLOCK
SOURCE
ON OFF
ALL 1 CD
REPEAT
AUTO
SOUND
MODE
RANDOM
PROGRAM
TUNED
STEREO
DAILY
REC
1 2 3 4
5 6 7 8
9 10 11 12
14 13 15 16 CH
VOL
MHz
kHz
SET
CD TUNER
Band display, Frequency display
Preset channel
MULTI CONTROL indicator
MPX / V. REPLACE
/ V. MASKING
FM/AM
Number keys
TUNER
FM MODE
8
SET/DEMO