English – JVC CA-V888T User Manual

Page 26

English

LVT0024-001A

[ U, UF ]

To Play a Disc ——————————————————————————

This function plays the disc in the Unit continuously.

Prepare the discs.

Press the DISC button (1-3) of the disc you want to play.
The first track of the selected disc will begin playing.
When the selected disc finishes playing, the next disc will begin playing automatically.
When the last disc has finished playing, the Unit will stop automatically.

❏ When a DISC button is pressed while a tray is open, the open tray will close automatically and

Continuous Play playback begins from the first track of the disc.

To use Continuous Play from the first track of the disc selected by the disc marker, you do not need
to press a DISC button (1-3), just press the

‹/8 (SELECT) or CD button (or £ (SELECT) button

on the Remote Control).

Note: Continuous Play function may not work properly during playback of some video CDs. In such
a case, select “REPEAT ALL” before playing the video CDs. See “Repeating a Track or the Discs”
on page 26 for the operation.

Playing Order of Discs
❏ When playback starts from DISC-1, the playing order is DISC-1 → DISC-2 → DISC-3. When

DISC-3 has finished, the Video CD Player selects DISC-1 (the disc marker is on) and stops.

❏ When playback starts from DISC-2, the playing order is DISC-2 → DISC-3 → DISC-1. When

DISC-1 has finished, the Video CD Player selects DISC-2 (the disc marker is on) and stops.

❏ When playback starts from DISC-3, the playing order is DISC-3 → DISC-1 → DISC-2. When

DISC-2 has finished, the Video CD Player selects DISC-3 (the disc marker is on) and stops.
•

If any of the disc trays are empty, the Video CD Player skips that disc tray and continues
through the remaining disc trays in the order shown above.

Note: If there is no CD in disc tray for the DISC button you pressed, the message “NO DISC”
appears in the display. If there is no disc in the disc tray for the selected disc number, when the

‹/

8 (SELECT) or CD button (or the £ (SELECT) button on the Remote Control) is pressed,
playback begins from the next disc.

To stop play the disc, press the

7 (RETURN) button for the disc number being played.

To stop play and remove the disc, press the

0 button for the disc being played.

To pause (still), press the

‹/8 (SELECT) button (or the 8 (STILL) button on the Remote Control).

The Disc display will blink.
To cancel pause (still), press the

‹/8 (SELECT) button again (or press the £ (SELECT) button

on the Remote Control). Play continues from the point where it was paused.

To Select a Disc, Track or Passage within a Track ————————————

Press the DISC button (1-3) for the disc tray containing the track you want to play back.
Playback starts from the first track of the disc you selected.
❏ Example: for the third disc, press 3.

DISC

DISC