beautypg.com

Microphone mixing – JVC CA-V888T User Manual

Page 18

background image

14

English

LVT0024-001A

[ U, UF ]

To prevent howling and squealing (feedback) when using the microphone, adjust the MIC LEVEL
control and the VOLUME control. Also, try to avoid pointing the microphone towards the speakers.
❏ When two microphones are connected, turn the microphone ON/OFF switch for the microphone

that is not being used to OFF.

❏ When recording sound from the microphone, the digital echo effect is also recorded.

To Record Your Singing

1.

Follow the step in “Singing Along with Karaoke” above.

2.

Follow the steps in “Standard Recording” (See page 35) to record your singing.

❏ When recording Karaoke, Deck A cannot be used for the Karaoke source.

Singing Along With Multiplex Karaoke Video CDs or CD-Gs

If the disc you are going to play is a multiplex karaoke disc, the instrumental parts are recorded on
the left channel and the vocal parts are recorded on the right channel. So, you can select the output
sounds –– whether the instrumental parts only or both of the instrumental parts and vocal parts or
replacing the vocal to yours.
Before playing a disc, turn on the TV and select the video input so that you can view the pictures
from the Video CD player.

See how to select the output sounds on page 27 “Playing a multiplex sound CD”.

Microphone Mixing

When using special Karaoke sources for karaoke, use the following procedure.

1.

Set the MIC LEVEL control to MIN.

2.

Connect the microphone (not supplied) by plugging it into the MIC jack on the front panel.

3.

Start the source CD, tape, or other equipment.

4.

Adjust the VOLUME control and the MIC LEVEL control, as you sing into the microphone.
To apply echo to the microphone sound, follow the steps in “Digital Echo”. (Page 13.)

To Record Microphone Mixing

1.

Follow the steps in “Microphone Mixing” above.

2.

To record, follow the steps in “Standard Recording”. (See page 35.)

❏ When recording Microphone Mixing, Deck A cannot be used for the microphone mixing source.

Playing the Microphone Sound through the Speakers

1.

Set the MIC Level control to MIN.

2.

Connect the microphone (not supplied) by plugging it into the MIC jack on the front panel.

3.

Adjust the VOLUME control and the MIC LEVEL control as you sing into the microphone.
To apply echo to the microphone sound, follow the steps in “Digital Echo”. (Page 13.)

Recording from the Microphone

1.

Follow the steps in “Playing the Microphone sound through the Speakers” above.

2.

To record, follow the steps in “Standard Recording”. (See page 35.)