JVC CA-V888T - Manual (Page 12)

8
English
LVT0024-001A
[ U, UF ]
Using the Amplifier
VCR
Turning the Power On and Off
Turning the CA-V888T On——————————————————————
Press the button.
The display comes on and the STANDBY indicator goes out.
The CA-V888T comes on ready to continue in the mode it was in when the power was last turned
off.
❏ If the last thing you were doing was listening to a tape in Deck B, you are now ready to listen to
a tape again in Deck B, or you can change to another source.
❏ If you were listening to the Tuner last, the Tuner comes on playing the station it was last set to.
Turning the CA-V888T Off —————————————————————
Press the button again.
The STANDBY indicator lights up and the display is blank, except for the clock display.
❏ Some power (17 watts) is always consumed even though power is turned off (called Standby
Mode).
❏ To switch off the Unit completely, unplug the AC power cord from the AC outlet. When you
unplug the AC power cord, the clock will be reset to 0:00 immediately, and preset Tuner stations
will be erased after a few days.
STANDBY
STANDBY
When the CA-V888T is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Display
MUTE/ECHO
SHIFT
SOUND MODE
VOLUME –, +
MULTI CONTROL
MPX / V. REPLACE
/ V. MASKING
SOUND MODE
SEA CONTROL
VCR
VOLUME
PHONES
MIC LEVEL
MIC 1
MIC 2
ACTIVE BASS EX.
8
ON SCREEN
V.INTRO
HIGHLIGT
ON SCREEN
SLEEP CLOCK
SOURCE
ON OFF
ALL 1 CD
REPEAT
AUTO
SOUND
MODE
RANDOM
PROGRAM
TUNED
STEREO
DAILY
REC
1 2 3 4
5 6 7 8
9 10 11 12
14 13 15 16 CH
VOL
MHz
kHz
SET
CD TUNER
Source, Sound Mode etc.
MULTI CONTROL indicator
Graphic frequency
display
SOUND MODE indicator
Vocal Masking indicator
Volume Level
Digital Echo indicator