beautypg.com

JVC 0303-MK-ID-SN User Manual

Page 33

background image

EN

33

USING MENUS FOR DETAILED ADJUSTMENT

ON

I S

D

RETURN

OF F

I ND CUT

W

OF F

I DE MODE

W

0

ADJ . –

AUTO

LASH

F

LASH

F

OF F

ELE MACRO

T

OF F

EL F - T I MER

S

OF F

S

5

N

A

M

UAL

SNAP MODE

Refer to “Snapshot (For Tape Recording)” (

pg. 29).

GAIN UP

OFF: Allows you to shoot dark scenes with no picture
brightness adjustment.

[AGC]: The overall appearance may be grainy, but the
image is bright.

AUTO

: The shutter speed is automatically

adjusted (1/25 — 1/200 sec.). Shooting a subject in
low or poor lighting at 1/25 sec. shutter speed
provides a brighter image than in the AGC mode, but
the subject’s movements are not smooth or natural.
The overall appearance may be grainy. While the
shutter speed is being automatically adjusted, “

is displayed.

NAVIGATION

Refer to “NAVIGATION Function” (

pg. 21, 22).

MANUAL

The “

MANUAL” settings are effective only when the

Power Switch

@

is set to “

”.

DIS

OFF: To turn off this function.

[ON

]: To compensate for unstable images caused

by camera-shake, particularly at high magnification.

NOTES:

● Accurate stabilisation may not be possible if hand shake

is excessive, or under the following conditions:
• When shooting subjects with vertical or horizontal

stripes.

• When shooting dark or dim subjects.
• When shooting subjects with excessive backlighting.
• When shooting scenes with movement in various

directions.

• When shooting scenes with low-contrast backgrounds.

● Switch off this mode when recording with the camcorder

on a tripod.

● The “

” indicator

#

blinks or goes out if the Stabiliser

cannot be used.

SELF-TIMER

Refer to “Self-Timer” (

pg. 26).

5S

[OFF], 5S: Refer to “5-Seconnd Recording”
(

pg. 26).

Anim.: Allows you to record a few frames only. By
using an inanimate object and changing its position
between shots, you can record the subject as though
it is moving (

pg. 26).

TELE MACRO

[OFF]: To turn off this function.

ON: Usually the distance to a subject where the lens
is in focus depends on the zoom magnification.
Unless there is a distance more than 1m to the
subject, the lens is out of focus at the maximum
telephoto setting. When set to “ON”, you can shoot a
subject as large as possible at a distance of approx.
60 cm.

• Depending on the zoom position, the lens may go

out of focus.

WIDE MODE

[OFF]: Records with no change in the screen ratio.
For playback on a TV with a normal screen ratio.

CINEMA

: Inserts black bands at the top and

bottom of the screen. During playback on
wide-screen TVs, the black bands at the top and
bottom of the screen are cut and the screen ratio
becomes 16:9.

3

appears. When using this

mode, refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/LCD
monitor/viewfinder, black bands are inserted at the
top and bottom of the screen and the image appears
like a letterboxed 16:9 movie.

• The “CINEMA” mode is effective only when the

VIDEO/MEMORY Switch

t

is set to “VIDEO”.

SQUEEZE

: For playback on TVs with an aspect

ratio of 16:9. Naturally expands the image to fit the
screen without distortion.

3

appears. When

using this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording on 4:3
TVs/LCD monitor/viewfinder, the image is elongated
vertically.

• The “SQUEEZE” mode is effective only when the

VIDEO/MEMORY Switch

t

is set to “VIDEO”.

D.WIDE

(GR-DX300 only):

3

appears. The

zoom range is extended beyond the maximum optical
zoom wide angle range. This mode’s wide angle
setting is equivalent to using a 0.7X wide conversion
lens. Zooming is possible from 0.7X to 10X. This
mode is suitable for shooting in a small room.

• The “D.WIDE” mode is effective only when the

VIDEO/MEMORY

t

Switch is set to “VIDEO”.

WIND CUT

[OFF]: Disengages the function which cuts down on
noise created by wind.

ON

: Helps cut down on noise created by wind.

9

appears. The quality of the sound will

change. This is normal.

FLASH

Refer to “Snapshot Flash” (

pg. 25).

FLASH ADJ.

Refer to “Flash Brightness Adjustment” (

pg. 25).

[ ] = Factory-preset

(GR-DX300 only)

(GR-DX300 only)

This manual is related to the following products: