JVC DR-M100S - Manual (Page 70)

Filename [M100SEK_10Subsidiary.fm]
Masterpage:Left+
70
EN
SUBSIDIARY SETTINGS
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
Format A DVD-RAM Disc
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select ADVD SET UPB, then press
ENTER.
3
Press selection keys to
select
AUTILITYB, then
press ENTER.
4
Press selection keys to
select
AFORMATB, then
press ENTER.
● The confirmation screen
appears.
5
Press selection keys to
select
AYESB, then press
ENTER.
● The confirmation screen appears.
6
Press selection keys to select AOKB, then press ENTER.
7
Upon completing formatting, ACOMPLETEDB appears on the TV
screen. Press ENTER to complete formatting.
8
Press SET UP to return to the normal screen.
Format A DVD-RW Disc
1
Perform steps 1 - 3 of AFormat A DVD-RAM DiscB as above
before continuing.
2
Press selection keys to select AFORMATB, then press ENTER.
Press selection keys to choose AVR MODEB or AVIDEO
MODE B, then press ENTER when ADISC WILL BE
FORMATTED B appears on the TV screen.
AVR MODEB:
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
AVIDEO MODEB:
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
3
Press selection keys to select AYESB, then press ENTER.
4
Upon completing formatting, ACOMPLETEDB appears on the TV
screen. Press ENTER to complete formatting.
5
Press SET UP to return to the normal screen.
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
● It is impossible to format DVD-R discs.
● All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles.
Format A Disc
ATTENTION:
● When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
● Never turn off the unit or disconnect the mains power cord
while
ANOW FORMATTING...B is displayed on the TV screen.
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Load a DVD-RAM/RW disc to format.
SET UP
(FGDE)
ENTER
Selection Keys
DVD SET UP FUNCTION SET UP INITIAL SET UP
LANGUAGE SET AUDIO OUTPUT UTILITY
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
FORMAT
FINALISE
CANCEL DISC FINALISATION
EXIT
OK
SELECT
SET UP
M100SEK_00.book Page 70 Tuesday, March 22, 2005 5:31 PM