John Lewis JLDWS 907 - Manual (Page 24)

24
E4 - Water temperature monitoring
malfunction
Interrupt the programme and switch off the
dishwasher. Switch the dishwasher back on,
programme it again and start the washing
cycle. If the problem persists, contact the
after-sales service.
E5 - Water intake malfunction
The appliance does not take in water or
does not do so correctly. Check that the
water connections are correct, the water
intake tap is turned on and the filter is not
fouled. If the problem persists, contact the
after-sales service.
E6 - Water pump-out malfunction
The appliance does not pump out the water
or does not do so correctly. Check that the
drain hose is not kinked or crushed and
that the siphon and filter are not fouled. If
the problem persists, contact the after-sales
service.
E7 - Turbine flow-regulator
malfunction
(for the relevant models only)
The appliance is not able to "measure" the
amount of water loaded accurately.
Interrupt the programme and switch off the
dishwasher. Switch the dishwasher back on,
programme it again and start the washing
cycle. If the problem persists, contact the
after-sales service.
E8 - Alternate washing system
malfunction
Interrupt the programme and switch off the
dishwasher. Switch the dishwasher back on,
programme it again and start the washing
cycle. If the problem persists, contact the
after-sales service.
E9 - Water intake system malfunction
Contact the after-sales service.
If the malfunction persists, contact
your authorised Service Centre.
-end-
Rinse
hold
Quick
wash
Economy
50°
Auto Intensive
70°
-end-
Rinse
hold
Quick
wash
Economy
50°
Auto Intensive
70°
-end-
Rinse
hold
Quick
wash
Economy
50°
Auto Intensive
70°
-end-
Rinse
hold
Quick
wash
Economy
50°
Auto Intensive
70°
-end-
Rinse
hold
Quick
wash
Economy
50°
Auto Intensive
70°
-end-
Rinse
hold
Quick
wash
Economy
50°
Auto Intensive
70°