John Lewis JLDWS 907 - Manual (Page 13)

13
5. Replace the cap tightly turning it
clockwise until it stops with a click.
Do not worry if water overflows
from the unit when filling with salt,
this is quite normal.
The salt indicator light on the
control panel can remain on for 2-6
hours after the salt has been
replenished, assuming the
dishwasher remains switched on. If
you are using salt that takes longer
to dissolve then this can take longer.
The operation of the machine is not
affected.
Filling with rinse aid
Warning! Only use branded rinse
aid for dishwashers. Never fill the
rinse aid dispenser with any other
substances (e.g. dishwasher cleaning
agent, liquid detergent). This would
damage the appliance.
Rinse aid ensures thorough rinsing,
and spot and streak free drying.
Rinse aid is automatically added
during the last rinse.
1. Open the container by pressing the
release button (A).
2. Add the rinse aid in the container. The
maximum level for filling is indicated by
"max". The dispenser holds about 110
ml of rinse aid, which is sufficient for
between 16 and 40 dishwashing cycles,
depending upon the dosage setting.
3. Ensure that the lid is closed after every
refill.
Clean up any rinse aid spilt during
filling with an absorbent cloth to
avoid excess foaming during the next
wash.